About Oxitem-iron and light metals and cement, plaster and concrete -
Step 1: Elimination of lodestone for sandblasting or abrasive discs. Make sure it is clean of grease, dirt or dust. New surface: Remove grease, dirt and dust. On surfaces and painted: Remove paint in poor condition and proceed as fresh surface. Step 2: With the base properly prepared, apply a coat of primer Oxitem. Let dry 8 hours before applying Oxitem.
Step 3: Apply 2-3 hands on the primer to ensure proper oxidation. Step 4: Apply 1 coat and wait 20-30 minutes. Apply a second coat if necessary. The aspect of the system at this point is fully equal to the natural oxidation of iron, should not have any handling or rubbing (indoor), can be left in this state. In case you are in an area exposed to friction or outdoors, it is necessary to protect the system.
Step 5: For exterior Apply the protector Oxitem once the surface is dry.Aplicar el Protector Oxitem una vez que la superfice esté seca.
Step 5: For interior Apply the sealer Mate Oxitem once the surface is dry
|
