On cement, plaster and concrete
Step 1:Elimination of Cahuita by ganallado or abrasive discs. Make sure it is clean of grease, dirt or dust. ON NEW SURFACE: Remove grease, dirt and dust. ON PAINTED SURFACES: Remove the paint in poor condition and proceed as fresh surface. Step 2: With the base properly prepared, apply a coat of primer Oxitem. Let dry 8 hours before applying Oxitem.
Step 3: Apply 2-3 coats on the primer to ensure proper oxidation. Step 4: Apply 1 coat and wait 20 to 30 minutes. Apply a second coat if necessary. The aspect of the system at this point is fully equal to the natural oxidation of iron. If you do not have any handling or rubbing (indoor), can be left in this condition, in case you are in an area exposed to friction or outdoors, it is necessary to protect the system.
Step 5: For exterior Apply the protector Oxitem once the surface is dry.
Step 6: For interior Apply the sealer Mate Oxitem once the surface is dry.
|
