Galvanized and other metals(poor condition and new surfaces), iron and steel(old and new walls)
| Galvanized and other metals: New and Poor condition surfaces |
Step 1:Clean with detergent or solvent Blatem Universal. Apply primer by brush or roller Multipurpose. |
    |
| Step 2: Apply two coats of Enamel Acrylyc / Blatemlux / Barnilac Satin. |
 |
| Iron and steel: New walls |
Step 1: Removed by brush, spray all traces of cement, gypsum, etc.. Clean grease with detergent or solvent Blatem Universal. |
| |
Step 2: Apply one coat of primer Multi, Mini or Blatemprimer Antioxidant. |
 |
| Step 3: Apply two coats of: Enamel Acrylic / Blatemlux / Barnilac Satin. |
| |
| Iron and steel: Old walls |
Step 1: Clean grease with detergent or solvent Blatem universal. Remove the paint in poor condition with Universal Paint remover. |
 |
| Step 2: Apply one coat of primer or Multi Converter oxides. |
 |
| Step 3: Repeat "step 3" of iron and steel, new walls. |
.
.
