New surface / Painted surface in good condition / Surface in poor condition

New Surface

Step 1: Dispose of waste in the same work, and then sanding.

Step 2: Give a coat of Fixer diluted in 1.4 parts water ratio depending on the absorption of gypsum. Putty sanded with fine sandpaper and remove the dust with brush or whisk broom.

Step 3: Sand the putty. Paint surfaces with putties with the same paint or sealant. The putty must be sanded with fine sandpaper. Remove dust with a brush.

Step 4:

Finish with two coats of plastic paint:Eco-paints-plastic,special-smooth,plastic-matt,silk-paint,satin-paint,paint-with-relief.For more plastic paint see the section of plastic paint.

Painted surface in good condition

Step 1:

Step 2: Sand the putty. Paint surfaces with putties with the same paint or sealant. The putty must be sanded with fine sandpaper and remove the dust with brush or whisk broom.