| New varnished wood for interior |
| |
| Step 1: If we change the colour of the wood we can give a coat of this dye. |
| |
 |
| |
| Step 2: Apply with brush and lower with Blatem Universal Solvent at 30%. |
| |
   |
| |
| Step 3: Let dry for 24 hours and re-sand with grain 280. |
| |
 |
| |
| For more information see the section varnish treatments of wood. |
| |
| New exterior wood |
| |
| Step 1: Sanding the wood. |
| |
| |
| |
| Step 2: Apply with brush and lower with Blatem Universal Solvent at 30%. |
| |
| |
| |
| Step 3: Let dry for 24 hours and re-sand with grain 280.Apply a 2nd coat of varnish and 15% lower with Blatem Universal Solvent. Use the same varnish as step 2. |
| |
| For more information see the section varnish treatments of wood. |
| |
| |
| |
| |
| |
| |
| |
